From Fedora Project Wiki

Revision as of 15:14, 21 January 2011 by Elemc (talk | contribs) (поправил ошибочку)

Дни Испытаний Fedora
Именование сетевых устройсв с использованием Biosdevname

Website QA/Fedora_15_test_days
IRC #fedora-test-day (webirc)
Mailing list test


Не та дата?
Если Вы пришли на эту страницу до или после официальной даты тестирования, это не значит, что страница для Вас бесполезна. Вы можете провести тестирование и добавить результаты тестов в таблицу и Bugzilla. Если Вы пришли спустя месяц на данную страницу, то посмотрите, возможно сейчас проводятся или уже проведены дополнительные и/или подобные испытания, но более новые. Посмотреть это можно в расписании тестирования.

Что тестируем?

Сегодняшний день испытания будет посвящен тестированию Именованию Сетевых Интерфейсов в Fedora Rawhide

Традиционно сетевые интерфейсы в Linux называются ethN. С несколькими сетевыми адаптерами (встроенными, дополнительными, одно- и многопортовыми) в современных серверных платформах именование происходит "слепое", не возможно с точностью сказать, какой адаптер будет именоваться eth0 встроенный или PCI-адаптер, что в свою очередь не удобно для администрирования сервера.

Данный вопрос решается путем присвоения имен сетевым интерфейсам, основываясь на их физическое расположение на системной плате. Biosdevname, это утилита разработанная в Dell, которая предлагает имена сетевым интерфейсам в заивисимости от их физического расположения.

Naming convention followed is:

  • Embedded devices: em<port>
  • Add-in PCI cards: pci<slot>#<port>_<virtual-function-instance>

Please refer to the following link for more details on the issue itself and various solutions we proposed upstream to address this issue which were unsuccessful.

Who's available

  • Narendra K (irc_nick1) will be your host for the day.

The following cast of characters will be available testing, workarounds, bug fixes, and general discussion ...

Prerequisite for Test Day

Hardware Requirements
  1. Computer system (Servers/Laptops/Desktops) with onboard(Lan-On-Motherboard) network adapters and/or add-in network adapters.
  2. Single and multiport add-in network adapters with SRIOV capability
  3. It is strongly advised that your hardware profile uploaded to Smolt according to these instructions
Firmware/BIOS requirements
  1. System firmware/BIOS should implement SMBIOS type 41 record which defines a device type instance and string for onboard devices (network adapters included)or $PIRQ Table(PCI Irq Routing Table).
  2. System firmware/BIOS should implement SMBIOS type 9 record or implement $PIRQ Table(PCI Irq Routing Table).
Software Requirements
  1. The system should be updated to Fedora Rawhide
  2. The SMBIOS type 41 device type instance and string should be available in sysfs. Other OEMs might export this information in a different SMBIOS type. If it is exported to sysfs, look for the following sysfs links.
    # lspci | grep -i ether
    01:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
    01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
    02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
    
    # find /sys/ -name index
    /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/index
    /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/index
    /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.0/index
    /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.1/index
    
    # find /sys/ -name label
    /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/label
    /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/label
    /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.0/label
    /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.1/label
    

How to test?

At a high level, the testing will focus on

  1. Network interface names during install time
  2. Network interface names after installation is completed (after you login for first time)
  3. Required changes available in ifcfg-ethN config files
  4. Upgrading from a previous update (Say Fedora 14) to Fedora Rawhide does not affect the naming scheme that existed in the previous update (Say Fedora 14).

Update your machine / Available Rawhide Installation Methods

There are several ways to upgrade your test system.

Upgrading From Fedora 14 to Today's Rawhide
Upgrade from Fedora 14 to Fedora Rawhide using yum -- for guidance, see yum update from previous release
Install Today's Rawhide
Install Fedora Rawhide using Fedora 14 ISO media -- for guidance, see Install rawhide using Fedora 14 ISO
Boot into a Rawhide Live Image
Download and boot a Fedora Rawhide live image -- for guidance, see How_to_create_and_use_Live_USB

Test Cases

Upgrade Testing - Test cases in this category need to executed when a Fedora 14 system is to be upgraded to Today's Rawhide. Please refer to the section Upgrading From Fedora 14 to Today's Rawhide above.

Install Time Testing - The test cases in this category need to be executed when installation of Rawhide is in progress. Please refer to the section Install Today's Rawhide above.

Run Time Testing - The test cases in this category need to be executed when you are booted into Fedora Live Image. Please refer to the section Boot into a Rawhide Live Image above to download a Fedora Rawhide Live Image.

Test Results

Construct a table or list to allow testers to post results. Each column should be a test case or configuration, and each row should consist of test results. Include some instructions on how to report bugs, and any special instructions. Here's an example, from a Palimpsest test day:

If you have problems with any of the tests, report a bug to Bugzilla usually for the component udisks, or gnome-disk-utility for bugs in the Palimpsest graphical front end itself. If you are unsure about exactly how to file the report or what other information to include, just ask on IRC and we will help you. Once you have completed the tests, add your results to the Results table below, following the example results from the first line as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to the Smolt profile of the system you tested. For each test case, if your system worked correctly, simply enter the word PASS. If you had trouble, enter the word FAIL, with a footnote indicator, and put a link to the bug report in the References column (as in the example line). For tests you could not perform, enter a dash.

User Smolt Profile names after install names after upgrade on-board ifaces add-in ifaces SRIOV ifaces interface configuration References
Sample User HW
Pass pass
none
Inprogress inprogress
Pass pass
Warning warn
[1]
Fail fail
[2]
  1. Test pass, but also encountered RHBZ #54321
  2. RHBZ #12345