XO Hardware
Status: NOT TESTED
We should check if XO built in wireless adapter (Marvell Libertas 88W8388 controller and 88W8015 radio) works as specified (http://laptop.org/laptop/hardware/specs.shtml).
- Wireless adapter identified by the system and working properly
- Status leds work as in speciffications (on = registered, blinking = activity) - (atodorov - PASS)
- 802.11b/g/s connectivity
- 802.11s functionality when CPU is powered down (BLOCKED by bug #465284 - can't suspend)
Basic Functionality
Status: NOT TESTED
Testing XO built in wireless adapter to work with standard security protocols/encryption methods.
- Ability to work with standard protocols and encryption methods:
- WEP Open/Shared with ASCII/HEX key (atodorov - PR - PASS)
- WPA/WPA2 with TKIP/AES encryption - need a radius server here...
- WPA-PSK/WPA2-PSK with TKIP/AES encryption
Advanced Functionality
Status: NOT TESTED
Ability of the XO built in wireless adapter to operate in more advanced modes like AP-bridge or rfmon.
- Mode Managed / Ad-Hoc / Master (AP)
- Ability to change output power
- RAW monitoring mode (rfmon) support
Applications
Network Manager
Status: NOT TESTED
- WPA & WPA2 works with NM from Shapshot 3 (rvokal)
- WEP works with NM (qark, in progress), (atodorov - snap#3 and PR open system/shared key - PASS )
Networking configuration using Network Manager
- VPN connection
- vpnc (Cisco compatible) (qark, in progress), (atodorov - snap#3 and PR - PASS )
- OpenVPN (qark, in progress)
System Config Network
Status: NOT TESTED
Networking configuration using system-config-network.
Wired networking USB adapters
Status: NOT TESTED
- Belkin USB 10/100 Ethernet Adapter, model # F5D5050 - works out of the box with NM on Snap#3 and PR (atodorov)
- Motorola SURFboard Cable Modem SB5100 - works like a charm with NM and network scripts (rvokal)
- Ralink RT2501USB wifi dongle - works like a charm on Snap#3 with NM (rvokal)
Test results
Please file your test results in the table below and link to the test case executed. Thanks!
| Test Case | Result | Bug(s) or more info |
| QA/TestCases/TestCaseTemplate | User:YOUR_NAME_HERE | bug_number |
| QA/TestCases/USB_RJ45_Adapter | User:atodorov | Belkin USB 10/100 Ethernet Adapter, model # F5D5050 |
| QA/TestCases/NM_WEP | User:atodorov | Open system/Shared key w/ password |
| QA/TestCases/NM_VPN_vpnc | User:atodorov | |
| QA/TestCases/NM_VPN_OpenVPN | Are we going to test all of certificate/password, etc? |
Color legend
Please use the following format when posting results to this page
| Untested |
| Indicates an inprogress or test that needs further review |
| Indicates a test that has passed |
| Indicates a failed test ... see Notes for details |
Known issues
- 469835 - NM doesn't identify wireless devices on the XO - usability issue since the XO has 2 wireless devices, mesh and regular. Waiting on upstream work from OLPC.
- _djr2 reported on IRC that if you set txpower to 20 via iwconfig it drops back to 10ish after a while. Could be related to some internal hardware power management.
- on some XOs ifwconfig eth0 reports a bit rate of 1/2 Mb/s. Not sure if bug or not. Sugar also reports the same.