This test case tests that ALSA works as a sound backend and that various frontends can be used to communicate with it.
- This test case should be performed on bare-metal machines. To be able to test with virtual machines, consider a USB device pass-through. Leave a note in the comments if you have performed this test using the VM with the USB Passthrough strategy.
- The computer must be equipped with a sound device.
- Install a desktop version of Fedora 35 (or later).
- Make sure the
alsa-utilspackage is installed.
- Connect your speakers (headphones) to your computer’s sound device.
- Use an audio file in wav format. If you do not have one you can download a suitable audio file. Some default files can be also found in the
- Perform the following steps as a regular user.
How to test
List the sound devices known to ALSA.
$ aplay -l
or (for more details)
$ aplay -L
Identify the ones that represent the logical (
pipewire) or a physical device (
Play the audio file (wav) over the default device.
$ aplay -D sysdefault <audiofile.wav>
Play the audio file (wav) over a selected ALSA device.
$ aplay -D hw:X <audiofile.wav>
Play the audio file (wav) over the pipewire device.
$ aplay -D pipewire <audiofile.wav>
Play the audio file (wav) over the physical device.
$ aplay -D sysdefault:CARD=USB <audiofile.wav>
Repeat the above step for all physical devices.
alsamixerand try setting the volume for a physical device use while playing some audio.
aplay -Llists physical and logical devices on the system.
- Audio can be played over different endpoints using the
- Volume levels can be adjusted for physical devices using
The device identifier might differ on your machine.
- This is valid for devices that support software volume adjusting. USB cards often use dedicated hardware knobs to do it and they cannot be controlled programmatically.