Fedora Test Days | |
---|---|
![]() | |
Power Management | |
Date | 2011-03-24 |
Time | all day |
Website | QA/Fedora_15_test_days |
IRC | #fedora-test-day (webirc) |
Mailing list | test |
What to test?
Today's instalment of Fedora Test Day will focus on Power Management
Who's available
The following cast of characters will be available for testing, workarounds, bug fixes, and general discussion ...
- Development - Jaroslav Škarvada (jskarvad)
- Quality Assurance - Jan Ščotka (jscotka)
Note: jskarvad will be available during 09:00 - 14:30 (UTC+1) on #fedora-test-day, #fedora-power, #fedora-devel, otherwise he will be on e-mail with non guaranteed response time.
Prerequisite for Test Day
- PM Test Day LiveCD or an updated Fedora 15 pre-release or you may get nightly composed LiveCD.
- It is possible to convert the LiveCD into LiveUSB by following the How_to_create_and_use_Live_USB instructions.
- Your hardware profile uploaded to Smolt according to these instructions
Typing convetions
In the following text commands that needs to be run as root are prefixed by #, e.g.:
# id
means to run id command under the root account. Commands prefixed by $ do not need to be run under the root account.
How to test?
Focus on pm-utils, powertop, tuned. Some test cases are only for laptop users and it is signalled in test case description field. If you do not have laptop just skip them. You can also skip other test cases (e.g. if you do not have enough time). In this case just leave the columns for skipped test cases blank. Please note that your report will be still valuable even if you do not finish all test cases. The procedure:
- Run test cases bellow.
- Report results to the result table.
Prepare your system
- Install the public key (in case you would like to verify the PM Test Day support package, otherwise you can skip this step because the public key will be installed automatically with the PM Test Day support package in the next step):
# rpm --import http://jskarvad.fedorapeople.org/RPM-GPG-KEY-pm-test-day
- Install the PM Test Day support package by:
- For 64 bit:
# yum install http://jskarvad.fedorapeople.org/pm-test-day-repo/pm-test-day-1-2.fc15.x86_64.rpm
- For 32 bit:
# yum install http://jskarvad.fedorapeople.org/pm-test-day-repo/pm-test-day-1-2.fc15.i686.rpm
- This procedure will also install the public key which will be then used for verification of packages from the PM Test Day repo.
- For 64 bit:
Finally make sure you have all current updates (and temporal fixes) installed by:
# yum update
Test Cases
Testcase | Description | Target | Approx. time required |
---|---|---|---|
pm-suspend | Tests suspend / resume via pm-utils. | All | 2 minutes |
pm-hibernate | Tests hibernate / resume via pm-utils. | All | 5 minutes |
pm-bugreport | Tests pm-utils bug-reporting functionality. | All | 2 minutes |
pm-powersave | Tests detection of AC / battery (upower functionality) and pm-powersave reactions to power source changes (pm-utils). | Laptops only | 2 minutes |
Lid close | Tests system reaction to lid close. | Laptops only | 2 minutes |
Backlight control | Tests LCD backlight control. | Laptops only | 1 minute |
PowerTOP 2.x basic | Tests PowerTOP 2.x basic functionality and UI consistency. | All | 5 minutes |
PowerTOP 2.x PE engine | Tests PowerTOP 2.x power estimation engine. | Laptops only | 60 minutes |
PowerTOP 2.x suggestions | Tests PowerTOP 2.x tunables. | All | 5 minutes |
Tuned basic | Tests tuned-adm (tuned) basic functionality. | All | 5 minutes |
Tuned psave idle | Measures energy consumption of machine in active idle with tuned laptop-battery-powersave profile. | Laptops only | 15 minutes |
Tuned psave load | Measures test duration / energy consumption of machine under load with tuned laptop-battery-powersave profile. | All, laptops preferred | 5 - 30 minutes |
Tuned perf idle | Measures energy consumption of machine in active idle with tuned throughput-performance profile. | Laptops only | 15 minutes |
Tuned perf load | Measures test duration / energy consumption of machine under load with tuned throughput-performance profile. | All, laptops preferred | 5 - 30 minutes |
Known Bugs
Already fixed
If you update your system from the PM Test Day repo or PM Test Day LiveCD, you shouldn't encounter the following bugs:
- RHBZ #684854 - It is about missing tab bar in PowerTOP 2.x.
- RHBZ #663995 - It is about SELinux AVCs during suspend / hibernate.
- RHBZ #689113 - It is about AVC on EEEPCs when laptop-battery-powersave profile is in use (write access to cpufv).
Currently unfixed
You can still encounter the following bugs:
- RHBZ #690177 - It is about the tuned profiles switching and tuned starting/restarting - it can take "forever".
- Currently there is no known workaround, probably something related to the systemd.
- AC ONLINE / BATTERY OSD notifications are not shown when booted from the LiveCD.
- Probably xauth problem, please try:
# xauth +
- Or substitue xosd command in pmtd_osd by logger command and check your logs instead of OSD.
- Probably xauth problem, please try:
- The PM Test Day Live CD doesn't seem to support resume from hibernate using the swap that is located on the LVM.
- You need to use swap partition outside the LVM or F15 installed on your harddrive.
Test Results
If you have problems with any of the tests, report a bug to Bugzilla usually for the component pm-utils, or powertop, or tuned. If you are unsure about exactly how to file the report or what other information to include, just ask on IRC and we will help you. Once you have completed the tests, add your results to the Results table below, following the example results from the first line as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to the Smolt profile of the system you tested. For each test case, use the result template to enter your result, as shown in the example result line. bugreport.txt will be generated by test case pm-bugreport, instructions for uploading are included in this test case. The bugreport.txt gives us valuable information about your HW / SW configuration and debug log of your last suspend / hibernate process. If you ran the tuned profile tests, please write the results to the second table.
User | Smolt Profile |
pm- suspend | pm- hibernate | pm- bugreport | pm- powersave | Lid close | Backlight control | PowerTOP 2.x basic | PowerTOP 2.x PE engine | PowerTOP 2.x suggest. | Tuned basic | References |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Sample User | HW | ![]() |
![]() |
bugreport![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
||
Jan Scotka | Thinkpad lenovo T61 | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
Albert Pool | HW | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| |
pfps | ![]() |
![]() |
[1] | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| |
Tao Wu | HW | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|||||
Radek Vokal | Dell d620 with NVidia | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|||
Jan Vcelak | Dell Latitude E6510 | in progress | ? | ? | ? | ? | ? | ? | ? | ? | ? | |
SrinivasG | [Dell PowerEdge R710] | ![]() |
If you ran the tuned profile tests, please write these results to the table bellow.
User | Tuned psave idle | Tuned psave load | Tuned perf idle | Tuned perf load | References |
---|---|---|---|---|---|
Sample User | E:2300 mWh | T:320 / E:3000 mWh | E:2200 | T:300 / E:3200 mWh![]() |
|
Jan Scotka | |||||
Albert Pool | ![]() |
![]() |
![]() |
![]() |
|
pfps |