- 1 Beta Objectives
- 2 Beta Release Requirements
- 2.1 Process requirements
- 2.2 Initialization requirements
- 2.3 Installer requirements
- 2.3.1 Remote package sources
- 2.3.2 Direct kernel boot
- 2.3.3 Installation interfaces
- 2.3.4 Default package set
- 2.3.5 Package set selection
- 2.3.6 Kickstart delivery
- 2.3.7 Guided partitioning
- 2.3.8 Custom partitioning
- 2.3.9 Hardware and firmware RAID
- 2.3.10 Scripted installation
- 2.3.11 Unattended installation
- 2.3.12 Rescue mode
- 2.4 Upgrade requirements
- 2.5 Virtualization requirements
- 2.6 Post-install requirements
- 2.7 Domain client requirements
- 2.8 Server Product requirements
- 2.9 Cloud Product requirements
- 3 Beta Blocker Bugs
- 4 Contingency Plan
- 5 Confirming Beta Requirements
- 6 Related Pages
The objectives of the Beta release are to:
- Publicly release installable media versions of a code complete test release: Beta is the last widely co-ordinated test release point in any given release cycle
- Finish testing Fedora 24 Changes
- Identify as many F24 Final blocker bugs as possible
Beta Release Requirements
In order to be released to the general public, a compose must meet all of the following criteria. This is intended to make the decision process as clear and straightforward as possible. Mostly met items are incomplete until they are met. Optional and nice to have items should not be included in this list.
There may be times where a requirement is unmet only in a particular configuration, such as with some keyboard layouts but not others, or if a particular character is used in a username, password or passphrase. In such cases, the release team should use their judgement and refer to precedent to determine whether or not the issue should be considered to block the release. They should consider the number of users likely to be affected by the issue, the severity of the case when the issue is encountered, and the ease or otherwise with which the issue can be avoided by both informed and uninformed users.
The term release-blocking desktops means all the desktop environments in which bugs are currently considered capable of blocking a Fedora release. The current set of release-blocking desktops for x86_64 is GNOME and KDE, and for aarch64 is GNOME. No desktop is release-blocking for 32-bit ARM. Note that bugs in desktops that are not part of this set which would infringe these criteria automatically qualify for freeze exception status, according to the freeze exception bug process.
The term release-blocking images means all the images in which bugs are currently considered capable of blocking a Fedora release. The current set of release-blocking images includes the images defined by the three primary Products - Server, Workstation and Cloud - in their product requirement documents and/or technical specifications, and the KDE live image. As of Fedora 24, no 32-bit x86 image can be 'release-blocking', by FESCo policy. The canonical list of release-blocking images for Fedora 33 is on this page.
Alpha criteria met
All Fedora 24 Alpha Release Criteria must be met.
Beta blockers CLOSED
Image size requirements
The release-blocking images must meet current size requirements.
Release-blocking images must boot
All release-blocking images must boot in their supported configurations.
Remote package sources
When using the dedicated installer images, the installer must be able to use HTTP, FTP and NFS repositories as package sources.
Direct kernel boot
It must be possible to install by booting the installation kernel directly (including via PXE) and correctly specifying a remote source for the installer itself.
The installer must be able to complete an installation using the serial console interface.
Default package set
When installing with a dedicated installer image for a specific Fedora flavor, the default package set must be the correct set for that flavor.
Package set selection
When installing with the generic network install image, interactively selecting a package set other than the default must work.
The installer must be able to use all available kickstart delivery methods.
When using the guided partitioning flow, the installer must be able to:
- Cleanly install to a disk with a valid ms-dos or gpt disk label and partition table which contains existing data and sufficient unpartitioned space for a Fedora installation
- Complete an installation using any combination of disk configuration options it allows the user to select
- Remove existing storage volumes to free up space, at the user's direction
- Reject or disallow invalid disk and volume configurations without crashing.
When using the custom partitioning flow, the installer must be able to:
- Correctly interpret, and modify as described below, any disk with a valid ms-dos or gpt disk label and partition table containing ext4 partitions, LVM and/or btrfs volumes, and/or software RAID arrays at RAID levels 0, 1 and 5 containing ext4 partitions
- Create mount points backed by ext4 partitions, LVM volumes or btrfs volumes, or software RAID arrays at RAID levels 0, 1 and 5 containing ext4 partitions
- Remove a planned storage volume from the planned layout
- Assign sizes to newly-created storage volumes and containers
- Encrypt newly-created storage volumes
- Remove existing storage volumes
- Assign mount points to existing storage volumes
- Reject or disallow invalid disk and volume configurations without crashing.
Hardware and firmware RAID
- The installer must be able to detect and install to hardware or firmware RAID storage devices.
The installer must be able to complete a scripted installation which duplicates the default interactive installation as closely as possible.
Any installation method or process designed to run unattended must do so. There should be no prompts requiring user intervention.
The rescue mode of the installer must start successfully and be able to detect and mount any installation performed according to the applicable criteria, and provide a shell with access to utilities capable of performing typical recovery operations.
For each one of the release-blocking package sets, it must be possible to successfully complete a direct upgrade from fully updated installations of the last two stable Fedora releases with that package set installed.
Self hosting virtualization
The release must be able host virtual guest instances of the same release.
Guest on current stable release
The release must install and boot successfully as a virtual guest in a situation where the virtual host is running the current stable Fedora release.
Except where otherwise specified, each of these requirements applies to all supported configurations described above.
Expected installed system boot behavior
A system installed without a graphical package set must boot to a working login prompt without any unintended user intervention, and all virtual consoles intended to provide a working login prompt must do so.
The installed system must be able to play back sound with gstreamer-based applications.
No part of any release-blocking desktop's panel (or equivalent) configuration may crash on startup or be entirely non-functional.
Automatic mounting of removable media on insertion must work in release-blocking desktops.
The installed system must be able to download and install updates with the default graphical package manager in all release-blocking desktops.
Shutdown, reboot, logout
Shutting down, logging out and rebooting must work using standard console commands and the mechanisms offered (if any) by all release-blocking desktops.
Domain client requirements
These requirements apply to any system properly configured as a client of another system which is an active and correctly configured with the Server Domain Controller role.
The system must be able to authenticate users against the domain controller's accounts using SSSD.
Server Product requirements
These requirements apply only to the Server product.
It must be possible to forward system logs to a remote system using Server packages.
Role functional requirements
The core functional requirements for all Featured Server Roles must be met, without any workarounds being necessary.
The other functional requirements for all Featured Server Roles must be met, but it is acceptable if moderate workarounds are necessary to achieve this.
Cockpit management interface
It must be possible to log in to the default Cockpit instance and use it to:
- View the system's logs
- View the system's running services
- Enrol the system to a FreeIPA or Active Directory domain
Cloud Product requirements
These requirements apply only to the Cloud product.
Release blocking cloud images must be able to automatically utilize all available space on a supported volume.
The cloud-init package must be functional for release blocking cloud images.
Beta Blocker Bugs
A bug is considered a Beta blocker bug if any of the following criteria are met:
- A bug in a Critical Path package that:
- Cannot be fixed with a future stable update
- Has a severity rating of high or greater and no reasonable workaround (see definition of severity and priority)
- Bug hinders execution of required Beta test plans or dramatically reduces test coverage
- Bug relates to an unmet Beta Release Requirement
A Fedora Change being incomplete, in and of itself, does not constitute a blocker bug. The Change process is separate from this process. Changes are required to meet certain standards at certain points of the release cycle, but this is part of the Change process and managed, tracked and enforced separately from this process. However, if a proposed feature being incomplete causes any of the above criteria to be met, then the bug is a release blocker.
- If all of the Beta Release Requirements are not met by 20:00 UTC on Wednesday the week prior to release day, the release will be delayed by one week so that the Beta Release Requirements can be met.
- One week will be added to all remaining tasks in the release schedule, including the final release date.
- This decision will be made at the Go/No-Go Meeting.
Confirming Beta Requirements
QA has the responsibility of determining whether the criteria for the release has been met (as outlined above) through discussion with Development and Release Engineering. QA's findings will be reviewed and discussed at the Go/No-Go Meeting.